- APPS
- Stock Barcode 19.0
Warehouse work recorded at the shelf, the moment the barcode is scanned
For warehouse teams that receive, ship, move and count goods every day
Receive, deliver, move, count and scrap goods by scanning barcodes on a phone or scanner
Odoo 19.0 · Community Edition, Viindoo Cloud · OPL-1
What changes for your team
Receipts and deliveries checked line by line
Pickers work from a printed list, and someone types the quantities in later.
→ Open a Ready transfer and scan products, lots, packages and locations. Each scan lands on its line - a pack adds all its units - and Validate closes the transfer on the same screen.
Counts taken at the shelf, applied by location
Counts are written on paper and keyed in by someone who never saw the shelf.
→ Scan a location, then what is on it. Each line shows the difference to stock on hand, and Apply all applies the counted lines of that location only.
The main buttons on a printed sheet
With a scanner in one hand, every tap on the screen slows the work.
→ Print the command sheet and scan Validate, Cancel transfer, the +/- buttons and the other main actions of each screen.
Ready on day one
A Barcode app
Every user with Inventory access gets it in the menu, and can install it as an app on a phone or tablet from the user menu.
Any scanner, or the camera
A scanner that types like a keyboard needs no setup; a device with a camera reads codes too, and any number can be typed.
A demo sheet
On a demo database, print the demo sheet and scan its codes before labelling anything.
Set up first
The Warehouse Manager gives operation types, locations and products their barcodes once.
What is included
Receipts, deliveries, internal transfers, inventory counts and scrap by scanning, on the standard Inventory app. Nothing else is needed to run it.
Before you decide
Do we need special scanners?
No. A scanner that types like a keyboard works on every Barcode screen. The camera of a phone or tablet works where the browser allows it, which usually means an HTTPS connection.
What happens with GS1 labels?
With the GS1 barcode nomenclature selected for the company, a GS1 or aggregate label is applied completely or not at all, and a refused label names the part that failed.
Who sees which counts?
An operator sees only their own counts and cannot change a line a colleague started. A Warehouse Manager sees and applies every count.
Where does the data go?
Into the same transfers, counts and scrap orders as standard Inventory, in your own database. The module calls no outside service.
What does it take to run?
Inventory and an Inventory access right per user; a user without it sees a notice instead of the app. Lots, packages and storage locations are scanned once they are turned on in Inventory.
Try it, then ask us
The Documentation tab covers setup and daily use role by role. The Live Preview of this listing runs on demo data: print the demo sheet there and scan it.
Pre-sales & partnership
viindoo.com/contactusTechnical support
viindoo.com/ticketTechnical requirements
- Odoo version: 19.0
- Editions: Community Edition, Viindoo Cloud
- Required modules: Barcode, Barcode - GS1 Nomenclature, Inventory
- License: OPL-1
- Languages: English, Vietnamese
Stock Barcode
For: warehouse operators who work on a phone, a tablet or a handheld scanner, warehouse managers who prepare the barcodes and review the counts, and the administrator who installs the app and assigns the access rights.
Overview
Stock Barcode adds a Barcode app to Inventory. Warehouse staff receive goods, deliver them, move them between locations, count the stock and scrap damaged items by scanning barcodes instead of typing. The screens are large and touch-friendly, built for a phone held in one hand, and use the extra width of a tablet.
Edition: Odoo Community Edition.
The work on a transfer passes through these stages:
- Draft - the transfer is created, for example by scanning the barcode of an operation type. Acted on by the Warehouse Operator, who checks availability.
- Ready - every product can be picked. Acted on by the Warehouse Operator, who scans the products and validates the transfer.
- Done - the stock is moved. The transfer is finished and stays with the Warehouse Operator for a possible return.
Who uses this module
| Role | What they do | Access right to assign |
|---|---|---|
| System Administrator | Installs the app and gives each warehouse person the Inventory access right. | Administration / Settings |
| Warehouse Operator | Receives, delivers, moves, counts and scraps goods with a phone or scanner. | Inventory / User |
| Warehouse Manager | Sets barcodes on operation types, locations and products, and reviews every count. | Inventory / Administrator |
A person without an Inventory access right who opens the Barcode app sees a notice asking them to contact their administrator.
Setup (for the System Administrator)
Installation
- Open Apps.
- Remove the default filter and search for Stock Barcode.
- Click Activate. The Inventory app is installed with it if it is not installed yet.
After the installation a Barcode app appears on the home menu of every user with the Inventory / User access right.
Configuration
- Open Inventory ‣ Configuration ‣ Settings and turn on the options your warehouse needs: Lots & Serial Numbers (to scan lot and serial numbers), Storage Locations (to scan locations) and Packages (to use Put in pack).
- Make sure the units of measure of weighed products carry the number of decimals you want to see. Quantities read from a weight label follow this precision (see GS1 labels below).
- If your company labels its goods with GS1 barcodes, ask your implementation partner to select the GS1 barcode nomenclature for the company. Without it, a GS1 label is refused with a message saying that the barcode nomenclature of the company does not read it, and nothing is applied.
- Ask the Warehouse Manager to fill in the barcodes (see the Warehouse Manager chapter).
Assigning access rights
- Open Settings ‣ Users & Companies ‣ Users and open the user.
- In the Inventory line of the access rights, select User for warehouse operators or Administrator for warehouse managers.
- Click Save.
Warehouse Operator: receives, delivers, moves, counts and scraps goods
Open the Barcode home screen
- Tap the Barcode app on the home menu.
- The home screen shows a box to scan or type a barcode and three buttons: Operations, Inventory count and Print commands.
- Scan a transfer name to open that transfer, scan the barcode of an operation type to create a transfer of that type, or scan a product or a lot/serial number to see its stock on hand. A code that matches none of them shows the notice Barcode not found.
On a tablet the same screen uses the extra width.
Note
On a demo database a blue banner offers Print demo sheet, a sheet of ready-made barcodes to try the app. Click Dismiss to hide the banner on your device.
Install the Barcode app on a handheld device
The Barcode app has its own address, so you can bookmark it or open it straight from the home screen of the device.
- While the Barcode app is open in the browser, open the user menu (your avatar at the top right).
- Choose Install Barcode. The app opens in a window of its own, straight on the scanning screen.
The entry is not offered inside the installed app itself.
Find the transfer to work on
- On the home screen, tap Operations.
- Tap an operation type, for example Receipts. The number on its card is how many transfers are ready.
- The list shows only the transfers that are Ready, oldest scheduled date first.
- To see the transfers that are not ready yet, tap Show all open transfers. The list then also contains the Draft transfers and the ones waiting for stock; transfers that are done or cancelled never appear. Tap the button again to go back.
- When the list is long, tap Load more. Tap All operations to return to the operation types.
- Tap a transfer to open it. If it has no responsible person, you become the responsible person.
Receive goods by scanning
- Open the receipt, either from Operations or by scanning its name. The status box shows the status, the route, the scheduled date, the responsible person and how many lines are complete.
- Scan the barcode of each product. Each scan adds one unit to that product line and the line shows the scanned quantity against the expected one, for example 7 / 120 Units. A line that is partly scanned shows Partial, a line not yet scanned shows To scan, a complete line shows Complete and a line scanned beyond the expected quantity shows Excess. The Lines complete counter in the status box tells how many lines are done.
- If the product has a unit with its own barcode (for example a pack of 6), scan that barcode to add the whole quantity of the unit: one scan of a pack of 6 adds 6.
- To correct a quantity, tap the line, then use - and +, Clear to put the line back to zero, or Delete to remove it.
- Scan the barcode of a location to receive the next products there.
- Use Previous line and Next line to move between lines.
- When every line is done, tap Validate. If the system asks a question, for example whether to create a backorder, answer it on screen.
On a tablet the transfer status is shown next to the lines.
Scan lot and serial numbers
When the Lots & Serial Numbers option is on, a product tracked by lot or serial number is scanned together with its number.
- Receipt whose operation type creates new lots. Scan the product, then the lot or serial number. A number that does not exist yet is created when you validate the receipt. A serial number counts one unit, and the same serial number cannot be scanned twice on one transfer.
- Delivery, or an operation type that does not create lots. Only numbers that exist are accepted; an unknown number is refused and nothing changes.
- An operation type that uses no lots at all reports that the number is not applied.
- Delivery of a serial-tracked product. Scanning the product only selects its line; each serial number you scan is the one that leaves your warehouse.
- If you scan a product, then a new lot name, then a second new lot name without scanning the product again, the second name is added as a second line with quantity 0. Select that line and tap + to set its quantity.
Deliver goods by scanning
- Open Operations, tap Delivery Orders and open the delivery.
- If the delivery is not Ready, tap Check availability.
- Scan the products to pick, with their serial or lot number when they are tracked.
- Tap Delivery slip to print the slip, then Validate.
Move goods inside the warehouse
Internal transfers work like receipts and deliveries.
- Open Operations and tap the internal operation type (it appears when your warehouse uses internal transfers).
- Open the transfer, scan the source or destination location when you need to, scan the products, then tap Validate. A location that is not inside the source or the destination of the transfer is refused.
Create a transfer by scanning
- On the Barcode home screen, scan the barcode of the operation type, for example the Receipts barcode.
- A new transfer of that type opens. Scan the products to add them, then tap Validate.
If several operation types share the same barcode, no transfer is created and a notice asks to give each operation type its own barcode.
Other actions on a transfer
Below the lines of a transfer you find the actions of the transfer:
- Check availability - reserves the stock of a transfer that is not ready.
- Put in pack - puts the scanned lines in a package (when the Packages option is on).
- Print and Delivery slip - print the transfer or the delivery slip.
- Return - on a done transfer, creates a return.
- Scrap - scraps products of the transfer.
- Cancel transfer - asks you to confirm, then cancels the transfer; Keep leaves it open.
Count the inventory by location
- On the home screen, tap Inventory count.
- The count starts in the stock location of your warehouse. Scan the barcode of another location to count there: the location appears at the top and every following scan is counted in it. Tap the cross next to the location to clear it; the list then shows the counts of all locations.
- Scan each product (with its lot or serial number when tracked, or the barcode of a unit to count its whole quantity). Each scan adds one unit to the counted quantity of the line. A line shows the quantity on hand, who counted it and the difference. The side box tells how many lines are counted and how many differ.
- Tap a line to correct it with - and +, or tap Clear to put the count back to zero.
- Tap Apply on a line to accept its counted quantity, or Apply all to accept every counted line.
Apply all is scoped to the location you scanned: it only applies the counted lines of that location (and the locations inside it). When more lines are counted than the screen shows, a note reminds you how many lines will be applied.
A Warehouse Operator sees only their own counts, and the screen says so. A Warehouse Manager sees the counts of everybody. A line that someone else is counting cannot be changed by you.
Scrap products by scanning
- Open Inventory ‣ Operations ‣ Adjustments ‣ Scrap and click New, or tap Scrap on an open transfer.
- Scan the product barcode. The product is filled in and every further scan of the same product adds one to the quantity. Scan the barcode of a unit, for example a pack of 6, to add its quantity. A product with another barcode replaces the first one and restarts the quantity.
- Scan the lot or serial number, the location or the package when the form asks for them. A product can also be found by its internal reference when it matches no barcode.
- If nothing matches, a notice says that the barcode was not found and nothing changes.
- Click Validate.
The scrap form reads codes exactly like the Barcode app does, including GS1 labels and aggregate labels (see GS1 labels).
GS1 labels
When your company uses the GS1 barcode nomenclature, one label can carry the product, the lot or serial number, the quantity and more. The app reads the whole label in one scan:
- A label is all or nothing. If any part of the label is refused (an unknown product, an unknown location, a quantity in an unrelated unit, two quantities, a lot of another product), nothing at all is recorded and a message explains why.
- An aggregate label carrying several codes is read code by code under the same rule: if one code is refused, none is applied.
- Parts of a label the app does not use are ignored and listed in the confirmation message.
- For a weight label, the quantity is converted to the unit of measure of the product and rounded to the precision configured on your site for that unit, so the number of decimals you see on a weighed line is the one of that unit of measure.
A code that matches no record but has the structure of a GS1 label is refused as a whole, on receipts, deliveries, inventory counts and scrap forms, and it never becomes the name of a lot or serial number. The message names the company whose barcode nomenclature did not read the label. On the Barcode home screen such a code only shows Barcode not found.
A code has the structure of a GS1 label when it holds a GTIN element: 01 or 02 followed by 14 digits whose last one is a valid check digit. The element counts at the start of the code, after a GS1 separator (#, Alt029 or the invisible GS character), or right after other fixed-length GS1 elements such as a date (17 and 6 digits) or a package number (00 and 18 digits). These three separators are the ones the app knows; a different separator configured on the barcode nomenclature is not recognised.
When such a code really is the name of a new lot or serial number, create that lot or serial number in the company of the transfer first (Inventory ‣ Products ‣ Lots / Serial Numbers), then scan it again: a lot or serial number that exists in that company is recognised by its name.
One limit: when your company uses the GS1 barcode nomenclature, a name that the nomenclature reads entirely as a GS1 label is read as a label, so a lot or serial number with such a name cannot be scanned by its name. Give lots and serial numbers names of another shape.
Print the command sheet and the demo sheet
Barcode commands let you press a button by scanning a code instead of tapping.
- On the Barcode home screen, tap Print commands.
- Print the sheet and keep it near the work place. It is grouped by screen: the Barcode home screen (Operations, Inventory count), the transfer (Validate, Check availability, Return, Scrap, Cancel transfer, plus and minus, next and previous line), the inventory count (Apply, Apply all), dialogs (confirm or close) and the back-office forms (edit, save, discard). The code of Put in pack is printed only for people who use packages.
- Scan a code on the screen it is printed for. Codes starting with OBT press the matching button of the current screen, and only when that button is shown; codes starting with OCD run a general command, such as opening the Barcode app from anywhere. A command code is never taken as a product, lot, location or package.
On a demo database, tap Print demo sheet on the home screen. The sheet holds the barcodes of the demo receipt, the demo delivery, the demo count and the operation types that create a new transfer, so you can try every step of this guide with a scanner or by typing the numbers. The GS1 label of the sheet is read only when the company uses the GS1 barcode nomenclature; under the default nomenclature scanning it is refused with a message saying so.
Scan with the camera
- On a phone or tablet that has a camera, a camera button appears at the top right of every Barcode screen. Tap it and point the camera at a barcode; the result is handled exactly like a scan.
- On a device without a camera, or when the camera cannot be used (browsers usually require a secure HTTPS connection), the button is hidden. Type the number into the box Scan or type a barcode and tap the barcode button next to it.
A hardware scanner or a keyboard wedge scanner needs no setting: scanned codes arrive on the current screen automatically, and several codes in a row are applied in the order they arrive.
Warehouse Manager: sets barcodes and reviews every count
The Warehouse Manager does everything a Warehouse Operator does and, in addition, prepares the barcodes and reviews the counts.
Give barcodes to operation types
- Open Inventory ‣ Configuration ‣ Warehouse Management ‣ Operations Types and open a type.
- Fill in Barcode on the General tab. Give each operation type its own barcode: a barcode that several operation types of the company share creates no transfer.
- Click Save.
Give barcodes to locations
- Open Inventory ‣ Configuration ‣ Warehouse Management ‣ Locations (shown when Storage Locations is turned on in the Inventory settings) and open a location.
- Fill in Barcode and click Save.
Edit the product barcodes in one list
- Open Inventory ‣ Configuration ‣ Products ‣ Product Barcodes.
- Click the Barcode cell of a product variant, type or scan the barcode and move to the next line. The change is saved as you go.
The list is read-only for a manager who may not create products.
Review the counts
Open Inventory count in the Barcode app. As a Warehouse Manager you see every counted line, not only your own, and you can apply them with Apply or Apply all. Scan a location first to limit Apply all to that location. The list of the inventory adjustments of Inventory also has a Scan button that opens the same count screen.
Troubleshooting
- The Barcode app does not appear on the home menu.
- The user has no Inventory access right. Assign Inventory / User (see Setup).
- The screen says I need Inventory access.
- The same cause: ask your administrator for the Inventory / User access right.
- A scan says the barcode was not found.
- Check that the product, location, lot or operation type carries exactly that barcode, and that the barcode belongs to your company.
- A scan says the barcode is a barcode command.
- Codes starting with OBT or OCD are commands and are never read as data. Do not use such numbers as product or location barcodes.
- A scanned command does nothing.
- An OBT command presses the button of the same name on the open screen. When that button is not shown on the screen, the command is ignored.
- A label is refused and nothing was recorded.
- GS1 labels are all or nothing. Read the message: it names the part that was refused. Fix the product, location or unit of measure, then scan the label again.
- A GS1 label is refused as not read by the barcode nomenclature.
- The company does not use the GS1 barcode nomenclature. Select it for the company, or scan the product barcode instead.
- A new lot or serial number is refused as a GS1 label.
- See GS1 labels: create that lot or serial number in the company of the transfer first, then scan it again.
- The lot number is refused on a receipt.
- The operation type does not create lots. Ask the Warehouse Manager to tick Create New under Lots/Serial Numbers on the operation type, or scan an existing lot.
- I cannot see the counts of my colleagues.
- A Warehouse Operator sees only their own counts. A Warehouse Manager sees all of them.
- A product line says it is being counted by someone else.
- Only the person who started the count of a line can change it. Ask that person, or a Warehouse Manager, to apply or clear it.
- The camera button is missing.
- The device has no camera, or the browser does not allow it on this connection. Type the number instead.
FAQ
- Can I use a handheld scanner instead of the camera?
- Yes. Any scanner that types the code like a keyboard works on every Barcode screen.
- Does Apply all apply every count in the warehouse?
- No. When you scanned a location it applies the counted lines of that location only.
- Can one label carry several codes?
- Yes, when your company uses GS1 aggregate labels: each code of the label is applied, or none.
- Is a pack barcode the barcode of the product?
- A pack, a box or any other unit with its own barcode is a unit of the product. Scanning it adds the quantity of that unit, converted to the unit of the product.
- Which edition is supported?
- Odoo Community Edition.
- Where can I find the manufacturing version?
- See viin_mrp_barcode for barcode scanning in manufacturing.
Demo video: Stock Barcode
This software and associated files (the "Software") may only be used (executed, modified, executed after modifications) if you have purchased a valid license from the authors, typically via Odoo Apps, or if you have received a written agreement from the authors of the Software (see the COPYRIGHT file).
You may develop Odoo modules that use the Software as a library (typically by depending on it, importing it and using its resources), but without copying any source code or material from the Software. You may distribute those modules under the license of your choice, provided that this license is compatible with the terms of the Odoo Proprietary License (For example: LGPL, MIT, or proprietary licenses similar to this one).
It is forbidden to publish, distribute, sublicense, or sell copies of the Software or modified copies of the Software.
The above copyright notice and this permission notice must be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.